It has been developed as gates for cold rooms controlled by the atmosphere. Especially the sealed cell foam gaskets and stainless eccentric locking systems ensure airtightness for it. In these doors, there is a glazed control panel, which also can be applied directly to the cold room wall. Our door wing is produced as a monoblock. To not to being a reason for a thermal bridge of metal sheet, and all internal support sheets are joined together and with aluminum injection for profile’s frame provided total stability. They are manufactured using hygienic materials according to European standards. It does not contain any organic products. It does not undergo any deformation during washing with chemical disinfectant.
MODEL 1 | MODEL 2 | |||
Room temperature which is kept | ≥ 0°C | |||
Thickness of wing surface |
90 mm | 120 mm | ||
Maximum net transferring (width) |
255 cm | |||
Maximum net transferring (height) |
580 cm | |||
WING |
Panel thickness of the wing surface |
0,5 - 1,2 mm | ||
Panel alternative surface of the wing |
130µ pvc (plastisol) | |||
25µ painted | ||||
A304 - A316 | ||||
Lever handle |
External |
Standard arm with boomerang protection |
||
Internal |
Special design inner opening arm |
|||
Openable window (4-16-4) (Thermal series) |
Hinged 60x40 cm | |||
Gasket |
Single row rubber |
|||
Special design locking system for impermeability alternative |
Camshaft | |||
Suspension arm alternative |
Composite plastic-stainless | |||
CASE |
Case alternatives |
PVC / AL | ||
Case Panel / Wall closure alternative |
TPP / TCP |